Store
Festool Cordless Drills
Festool T 15+3 Lithium Ion Cordless Drill Set 564250
Festool's cordless drills look different, because they are different. Crafted to the highest level of German engineering, these cordless drills offer a level of quality not found in other cordless drills. From the EC-TEC brushless motors, to the interchangable Centrotec and FastFix chucks, these cordless drills were designed to work the way you work. The Festool T 3 offers greater torque than competing drills, even those with greater voltage - all in a well-balanced, lightweight, ergonomic design. ToolKing.com is authorized to sell Festool products only to customers residing the United States and its territories ToolKing.com promotional discount codes or coupons are NOT valid on Festool products. Features: FastFix Chuck System Second Generation Brushless Motor Dual Motor Speed Selector Drill / Drive Mode Selector Electronically Controlled Clutch Forward / Reverse Selector Soft, Ergonomic Grip Ventilation Ports The T+3 cordless drill has strategically placed ventilation ports to reduce the chances of premature wear due to overheating. The drill also features Festool's patented MMC electronics, which monitor and protect the drill from damage and overheating. Intelligent Lithium Ion Batteries Intelligent Battery Charger Magnetic Bit Stowage What's In the Box: Festool 564250 Lithium Ion Cordless Drill TRC 3 Charger Two Lithium Ion Batteries FastFix Right Angle, Eccentric and ½" Drill Chucks Centrotec Starter Set SYS 2 with Storage Compartment
Festool T 12+3 Lithium Ion Cordless Drill Set 564247
The Festool T 12 + 3 10.8-Volt Cordless Drill/Driver Kit offers greater torque than competing drills, even those with greater voltage - all in a well-balanced, lightweight, ergonomic design. This T 12 + 3 Cordless Drill by Festool includes 4 interchangeable chucks, so you can select which works best for your application. The right-angle chuck makes working in tighter spaces with this Cordless Drill/Driver more practical, while the eccentic chuck makes driving in corners a breeze. There is a standard keyless chuck and also a Centrotec chuck for use when you want something smaller and lighter. All of the chucks are easily switched out, thanks to the T + 3's FastFix chuck system. Features: Right-angle and eccentric chucks swivel 360 degrees with 16 locking positions Second-generation brushless motor gives higher efficiency, better reliability and longer service life Dual motor-speed selector switch is located conveniently on the top of the drill and can be used with the clutch settings to drive with full power or delicately Changing the speed setting does not change the torque produced by the motor Drive/drill mode selector is conveniently located and you can switch between them without losing your clutch setting In drill mode, the drill automatically overrides the clutch to make sure you get maximum power and torque; in drive mode, the clutch re-engages Electronically controlled clutch puts less wear on the motor and other wearable parts Forward/reverse switch to go between driving and removing screws Ergonomic, lightweight design reduces fatigue and increases comfort Magnetic bit storage for up to 4 1 inch driver bits Strategically-placed ventilation ports reduce the chances of premature wear due to overheating Festool's patented MMC electronics monitor and protect the drill from damage and overheating Intelligent microprocessor-controlled battery charger is designed to protect your batteries from damage and prolong their life Lithium-Ion batteries have a 3-year warranty and offer optimal charge and discharge cycles What's In The Box: Festool T 12 + 3 10.8-Volt Cordless Drill/Driver - 564247 TRC 3 Charger Two 10.8-Volt Lithium-Ion Batteries FastFix Right-Angle Chuck - 490293 FastFix Eccentric Chuck - 490294 Centrotec Starter Set - 492772 Systainer 2 Case - 445434
Festool 15.6V 3.0 Ah Ni-MH Battery for TDK Cordless Drills - 491823
Festool 15.6V 3.0 Ah Ni-MH Battery for TDK Cordless Drills - 491823
Festool 493539 Cordless Drill Fastfix Depth Stop Chuck
Festool 493539 Cordless Drill Fastfix Depth Stop Chuck
Festool 490294 Cordless Drill Fastfix Eccentric Chuck
The Festool 490294 is a Cordless Drill Fastfix Eccentric Chuck. The FastFix eccentric chuck offests the bit to the side of the chuck. This lets you drill and drive fasteners straight, even right up against sidewalls. ToolKing.com is authorized to sell Festool products only to customers residing the United States and its territoriesToolKing.com promotional discount codes or coupons are NOT valid on Festool products Features: Offset chuck places bit flush to side, lets you drill or drive right into corners. Chuck rotates 360°, with 16 presets. Quick-release collar will not mar adjoining surfaces. What's In the Box: Festool 490294 Cordless Drill Fastfix Eccentric Chuck
Festool 493539 Cordless Drill Fastfix Depth Stop Chuck
The Festool 493539 FastFix Depth Stop Chuck is a part of Festool's FastFix system, which allows for quick and easy accessory changes with any of their cordless drills. The 493539 Depth Stop Chuck works with an integral clutch that maintains the preset depth in any material independently— the torque setting doesn't need changed. With the quick-out ring, screws can be removed with the flick of a wrist and bit changes are fast and easy. Features: Quick-out ring allows screws to be backed out easily and without affecting the depth setting Works with the C12, TDK 15.6, T 15 + 3, and T 12 + 3 cordless drills What's In The Box: Festool 493539 FastFix Depth Stop Chuck
